MK Metals & Technology

Product Description

• The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• Available with metric and imperial threads

Cost-Effective Fixation for Non-Cracked Concrete (Without Approval) Product Description

The Fischer FWA bolt anchor is a cost-efficient fixing solution designed for applications where approved fixations are not required. It is suitable for use in non-cracked concrete and is available in zinc-plated steel and hot-dip galvanised steel, with both metric and imperial thread options.

The FWA bolt anchor offers two anchorage depths to suit different installation requirements. The standard anchorage depth provides high load-bearing capacity, allowing the use of fewer fixing points and smaller anchor plates. Alternatively, the reduced anchorage depth minimises drilling depth, resulting in faster installation and greater flexibility on site.

• Standard anchorage depth delivers high load capacities, reducing the number of fixings and anchor plate size

• Reduced anchorage depth lowers drill hole depth, saving installation time and improving flexibility

• Suitable for non-cracked concrete applications where approval is not required

• Available in zinc-plated and hot-dip galvanized steel for different environmental conditions

• Offered with metric and imperial threads to meet diverse installation needs

If you’d like, I can also:

• Shorten this for technical data sheets

• Make more sales-driven

• Adapt it for online marketplaces or brochures

Product Description

• Simple hammerset installation
• The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use.
• The hand setting tool EA-ST facilitates fast installation.

• Simple hammerset installation.
• The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use.
• The hand setting tool EA-ST facilitates fast installation.

Product Description

• Simple hammerset installation
• The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use.
• The hand setting tool EA-ST facilitates fast installation.

• Simple hammerset installation.
• The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use.
• The hand setting tool EA-ST facilitates fast installation.

Product Description

• Simple hammerset installation
• The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use.
• The hand setting tool EA-ST facilitates fast installation.

• Simple hammerset installation.
• The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use.
• The hand setting tool EA-ST facilitates fast installation.

Product Description

• The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammer-set installation.
• The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
• The EMS machine setting tool allows for effortless installation, particularly in the case of series installations.
• The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety.
• The fixing point at the head of 25 mm prevents the anchor from falling out of the drill hole before being expanded.
• The black fixing point prevents the anchor from falling out of the drill hole during overhead installation.

• Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve.
• Use of standard metric screws and threaded rods lowers complexity.
• Power-saving series installation with machine setting tool EA II S-SDS.
• Visual control due to embossing.
• ETA approval for multiple fixings.

Product Description

• The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• Available with metric and imperial threads

Product Description

• The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammer-set installation.
• The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
• The EMS machine setting tool allows for effortless installation, particularly in the case of series installations.
• The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety.
• The fixing point at the head of 25 mm prevents the anchor from falling out of the drill hole before being expanded.
• The black fixing point prevents the anchor from falling out of the drill hole during overhead installation.

• Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve.
• Use of standard metric screws and threaded rods lowers complexity.
• Power-saving series installation with machine setting tool EA II S-SDS.
• Visual control due to embossing.
• ETA approval for multiple fixings.

Product Description

• According to the new evaluation (ETA), the tensile strengths are decisive. Thus fewer anchors are required.
• The variable anchorage depths with sizes M8 to M16 allow a millimetre-accurate adjustment to the loads for the first time.
• The version with the cap nut offers an optically attractive anchoring and protects against injuries as well thanks to the round shape.
• The first bolt anchor is an M6 with an ETA assessment Option 1 for secure and reliable anchorings.
• The international approvals guarantee maximum safety and the best performance.
• General design certification for anchorage in steel fibre concrete for the Fischer bolt anchors FAZ II, FAZ II R and FAZ II HCR (diameter M6 - M24).

• One anchor – two anchorage depths: reduced anchorage depths save time and costs during drilling.
• With expansion clip for maximum load-bearing capacity. Thus fewer fixing points and smaller anchor plates are required. This saves time and costs.
• Minimum torque slippage: Simple assembly saves time as well as wear and tear.
• With approval for cracked concrete and fire inspection: maximum safety.
• General design certification for anchorage in steel fibre concrete for the Fischer bolt anchors FAZ II, FAZ II R and FAZ II HCR (diameter M6 - M24).

The Fischer Drop-In Anchor EA II is a high-performance fastening solution designed for secure anchoring in concrete. Ideal for medium- to heavy-duty applications, it features a robust, internal thread that allows for easy installation and removal of bolts or threaded rods. The anchor is designed for use in solid concrete and provides excellent load-bearing capacity. It expands upon installation, creating a strong and secure bond within the base material. The EA II is commonly used in construction projects, including the installation of machinery, railings, and structural elements, providing reliable, long-lasting performance in both indoor and outdoor environments.

The Fischer Drop In Anchor EA is a reliable, high-strength fastening solution designed for use in solid concrete. Ideal for medium- to heavy-duty applications, it provides a secure anchor point for threaded rods, bolts, and other fasteners. The anchor features an internal thread that expands upon installation, ensuring a tight and durable bond with the concrete base. It is commonly used in construction projects, including securing machinery, railings, and structural elements. The EA anchor offers excellent load-bearing capacity and is suitable for both indoor and outdoor use, providing long-lasting performance in a variety of demanding environments.

Product Description

• The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• Available with metric and imperial threads

The Fischer Wedge Anchor Bolt FAZ II ZP is a durable and reliable fastening solution designed for heavy-duty anchoring in concrete and masonry applications. Made from high-quality steel with a zinc-plated coating (ZP), it provides excellent corrosion resistance, making it ideal for both indoor and outdoor use. The FAZ II ZP features a wedge expansion mechanism that ensures a secure and stable hold once installed, offering high load-bearing capacity. It is easy to install, requiring only a drilled hole and tightening to activate the expansion. Commonly used in construction, industrial, and commercial applications, it delivers lasting strength and performance. 

The Fischer Wedge Anchor Bolt FZ II ZP is a robust, high-quality fastening solution designed for anchoring in concrete and masonry structures. Made from galvanised steel with a zinc plating (ZP), this anchor bolt offers excellent corrosion resistance, making it ideal for outdoor and harsh environments. It features a wedge expansion mechanism that ensures secure, reliable installation with high load-bearing capacity. The FZ II ZP is easy to install, requiring only drilling a hole and tightening the bolt, providing a strong, stable connection for various applications, such as securing machinery, structural elements, and equipment in commercial and industrial settings. 

Product Description

• The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• Available with metric and imperial threads